Course catalogue

Presentation 

This training course aims at providing a general description of the different types of lifting appliances that may be found on board ships and offshore units, their main characteristics and operating principles. It provides an introduction to the applicable rules and regulations related to lifting appliances. 

Objectives

On completion of the training, students will be able to: 

Get familiar with the various types of lifting appliances installed on board ships and offshore units. 

Know the regulations, which are relevant for inspection and certification of cargo gear, including international regulations and BV Rules. 

Understand the particularities of lifting appliances and the relevant requirements for the survey of materials and equipment.

Understand the scope of intervention for Cargo Gear in various stages – design, manufacturing and operation, including an overview of control and safety design requirements.

Program

Types of lifting appliances

Definitions

Derrick systems

Cranes

Typical crane types

Applicable Rules and Regulations

International Regulations and National Requirements

Bureau Veritas Rules, additional class notations and recognized standards

Bureau Veritas services

Cargo Gear Register Book

Design, Inspection, testing and surveys at works

Design acceptance criteria

Documents to be submitted

Inspection and testing

Steel wire ropes and fibre ropes

Loose gear

Winches

Survey of fitting on board

Overall tests prior to putting into service: Mandatory tests, overload test, testing at

Manufacturer’s test bench, inspections after testing

Marking

In-service surveys

Periodicity, scope and documentation

Guidelines for a thorough annual examination

Items to be tested: slew bearing, loose gear examination, ropes, hydraulic system

Control and safety devices

Thickness measurements, wear limits and criteria for replacement

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Cargo Gear and Lifting Appliances, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Cargo Gear and Lifting Appliances is obtained after completion of the course and passing the online test. 

Presentation

This training course aims at providing a general description of the requirements for the prevention of pollution by sewage from ships as defined by the Annex IV of the MARPOL Convention.

Objectives

On completion of the training, students will be able to:

Understand the MARPOL requirements for prevention of sewage pollution from ships.

Know the various sewage treatment systems which are accepted by the MARPOL Convention.

Know the equipment required on board different ship types.

Understand the criteria defined in the convention for the control of discharge of sewage.

Understand the requirements for survey and certification of ships.

Program

Introduction

Applicability

Definitions

Equipment

Types of sewage systems

Sewage treatment plant

Holding tank

Sewage comminuting and disinfecting system

Standard discharge connection

The special case of livestock carriers

Discharge criteria

Discharge of sewage from ships other than passenger ships

Discharge of sewage from passenger ships outside special areas

Discharge of sewage from passenger ships within a special area

Survey and certification

International Sewage Pollution Prevention Certificate

Certificate entries: Number of persons the ship is certified to carry; New or existing ship; 

New or existing passenger ship for the application of Regulation 11.3

Survey requirements

Type Approval Certificate for sewage treatment plants

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of MARPOL Sewage Pollution, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Sewage Pollution is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general introduction to the corrosion process, the protective coating used to prevent corrosion, the coating process and coating inspection.

Objectives

On completion of the training, students will be able to:

Know the different types of corrosion and their causes.

Understand the corrosion phenomenon and the threat it represents to the structural integrity.

Know the protective coating systems used in shipbuilding.

Be familiar with the constituents, structure and curing prerequisites of the protective coating systems.

Understand the different phases of the coating process and the requirements for successful coating application.

Be familiar with coating inspection procedures and the requirements of the IMO PSPC.

Recognise the different forms of coating failure.

Program

Module 1 - Introduction to Corrosion and Protective Coatings

Corrosion definition

Causes of corrosion

Different forms of corrosion

Corrosion rate

Protective coating systems

Paint coating components

Types of coatings

Technical data sheets

Coating cure

Module 2 - Coating Process and Inspection

Coating process scheme

Surface preparation

Cleaning techniques

Surface preparation

Paint application

Coating durability requirements

Coating inspection

Coating system documentation

Coating inspector qualifications

Inspection procedures and plan

Coating defects

Certificate

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Corrosion and Coating awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Corrosion and Coating, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Presentation

This training course is about what an effective cyber security risk management should be. Its goal is not to address too many technical questions as the best technical expertise in the world won’t guarantee zero cyber risk. The course aims at providing your Company with a real battle plan: know the assets, know the enemies, organize accordingly and train the effectives. Although this will not be enough to avoid a cyber incident, the severity of the consequences of a cyber incident will depend on the company’s preparedness and ability to manage it.

Who the course is for?

The course ISM Code and Cyber Risk Management is aimed at anyone interested in understanding how an effective cyber security risk management should be. This may include Top Management of Shipping Companies, Ship Managers, Technical Superintendents, Ship Masters, Officers and Seafarers; Offshore Units Operators and Technical Staff, Shipyards Technical Staff; Surveyors; P&I and/or Insurance Inspectors; etc.

Objectives

On completion of the training, students will be able to:

Know what cyber security is, the main threats and their consequences.

Understand how to consider the cyber risks in the Safety Management System and how the ISM Code translated into cyber security.

Know the 12 cybersecurity commandments that will help implementing an efficient cyber risk management system.

Presentation 

This training course provides a general introduction to dynamic positioning systems, which are computer-controlled systems that automatically maintain the vessel's position and heading by using their propellers and thrusters. 

Objectives 

On completion of the training, students will be able to: 

Get familiar with dynamic positioning systems. 

Know the main components of dynamic positioning systems, equipment used and installation. 

Know the Class requirements in terms of surveys and tests of dynamic positioning systems 

Program 

History 

Characteristics and scope of DP systems 

Applications 

Equipment class 

Classification notations 

System configuration: power system, thruster system, control system, position reference systems, computer system, display system 

Redundancy 

o Redundant systems 

o System failures 

o Redundancy concept 

o Terms 

o Single fault tolerance 

o FMEA 

Design environment 

Essential non-DP systems 

Performance analysis 

Operational requirements 

System components 

o Power system 

o Thruster system 

o DP control system 

o Position reference system: acoustical, taut-wire and other reference systems 

Scope of DP surveys 

o Inspections at works 

o Surveys during construction, tests and trials 

o Surveys during operation: Annual and Renewal surveys, operational test, Occasional surveys

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Introduction to DP System awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to DP System, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Presentation

This training course provides a general overview of the MARPOL requirements to prevent air pollution from ships and offshore units.

Objectives

On completion of the training, students will be able to:

Know the international regulations related to the prevention of air pollution from ships and offshore units.

Understand the requirements for the control of emissions of substances from ships and offshore units.

Get familiar with the requirements concerning shipboard incineration and fuel oil quality.

Understand the concept of energy efficiency and related MARPOL requirements.

Know the various surveys required and the different certificates and documents to be available on board.

Program

Application

International regulations: ozone-depleting substances (ODS), nitrogen oxides (NOx)

Control of emissions

o Ozone-depleting substances (ODS)

o Nitrogen oxides (NOx)

o Sulphur oxides (SOx) and particulate matter

o Volatile organic compounds (VOC)

Shipboard incineration

Fuel oil quality

Bunker delivery notes

Energy efficiency design index (EEDI)

Ship energy efficiency management plan (SEEMP)

Survey and certification

Certificate

On completion of the training program, the student will be awarded:

A Certificate of MARPOL Air Pollution, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Air Pollution is obtained after completion of the course and passing the online test.

Presentation 

This training course provides general information about welding of aluminium structures. It contains an introduction to aluminium properties and describe the main issues regarding weldability of aluminium and its alloys. 

Objectives 

On completion of the training, students will be able to: 

Know the properties of aluminium and its alloys comparing to steel 

Understand the issues regarding weldability of aluminium alloys 

Recognize the main problems that can arise during design and production of aluminium ship’s structures 

Know the suitable welding processes for joining of aluminium ship hull 

Understand the application of bimetallic joints. 

Program 

Properties of aluminium alloys 

o Specific properties 

o Heat treatable and non-heat treatable aluminium alloys 

o Marine aluminium alloys 

o Designation of aluminium alloys 

Weldability of aluminium 

o Characteristics of aluminium referring to welding 

o Main issues: gas porosity, oxide inclusions and lack of fusion, hot cracking, reduced 

strength in the weld and heat affected zone, distortion 

o Choice of filler material 

Welding processes for aluminium 

o MIG aluminium welding 

o TIG aluminium welding 

o Typical defects in aluminium welding 

Joining of steel and aluminium in shipbuilding 

o Bimetallic strip for transition joints 

Preparation and design of welds 

o Guidelines for aluminium joint design 

o Examples of joints 

o Application of backing 

o Defects caused by poor preparation 

o Recommendations for aluminium welding

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Aluminium Welding awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Aluminium Welding, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination. 

Presentation

This training course is based on the Convention on the International Regulations for Preventing Collisions at Sea - 1972, (COLREG 72), which aims at determining the signalling system requirements for safe navigation.

Objectives

On completion of the training, students will be able to: Get familiar with steering and sailing rules. Understand the meaning and the positioning of navigation lights. Know the requirements of the Convention concerning lights, shapes and sound signals.

Program

Application and responsibilities

Definitions

Steering and sailing rules

o Conduct of the vessel in any conditions of visibility

o Conduct of the vessel in sight of one another

o Conduct of the vessel in restricted visibility

Lights and shapes

o Technical specification of lights

o Technical specification of shapes

o Definitions

o Visibility of lights

o Applicability: power-driven vessels, towing and pushing, sailing vessels, fishing vessels, vessels not under command, vessels restricted in their ability to manoeuvre, vessels constrained by their draught, anchored vessels and vessels aground

Sound and light signals

o Whistle

o Bell

o Gong

o Vessel equipment for sound signals

o Manoeuvring and warning signals

o Sound signals in restricted visibility

Certificate

On completion of the training program, the student will be awarded the following qualifications:

Certificate of COLREG awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of COLREG, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Presentation

This training course provides general information about cybersecurity in the Maritime Industry. It describes the main cybersecurity issues regarding the use of computer-based equipment in the professional environment and proposes ways to protect oneself from hackers.

Objectives

On completion of the training, students will be able to:

Understand that we are living in a digital ultra-connected world;

Know about main cyberattacks and ways to keep protected from them;

Enforce main cybersecurity rules on ships;

Understand Internet best practices and implement them;

Be cautious when using social networks.

Program

Digital revolution

o Digitalization transforms the world, your environment, your work on ships

o You are connected = you are vulnerable

o Internet is NOT a lawless zone

Cyberattacks on board and on a daily basis

o What is ransomware, and how to react to it

o How to use antivirus

o How to care about and protect data

o Why updates are necessary

o Why be cautious with unknown Wi-Fi networks

E-mail (professional and personal) best practices

o How to recognize corrupted e-mails from legit ones

o Think before you click

o How to react to the detection of a suspicious e-mail

Passwords

o How to protect them, how to generate them

Social networks

o Have you become a “like” addict

o Protect your e-reputation

o Protect your Company e-reputation

Your digital environment on board

o Your ship is like a connected factory

o How to react in case of a potential cybersecurity breach/incident

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Cybersecurity Awareness in Maritime Environment, issued by Bureau Veritas

Solutions Marine & Offshore.

The Certificate of Cybersecurity Awareness in Maritime Environment is obtained after completing the course and passing the online test.

Presentation

This training course describes the various elements of the ship's structure, the loads acting on the structure and the required strength of the ship's structure to sustain such loads.

Objectives

On completion of the training, students will be able to:

Know the typical structural arrangements of different ship types. Understand stiffened panels as the fundamental structural units in ship structures and know the different framing systems used in ship construction

Know the different types of loads acting on the ship's structure and understand the static sea pressure and the wave induced dynamic sea pressure. Understand the concept of net loading on the ship's structure, shear forces and bending moments. Get familiar with fatigue loads

Understand the stresses on ship's structure including longitudinal stresses on hull girder, stresses on primary supporting structure and local stresses and the strength of the ships structure. Get familiar with fatigue strength and understand the corrosion and the net scantling approach.

Program

Module 1 – Elements of Ship Structure

Main ship types

Materials used in shipbuilding

Structural elements: Plating, profiles, stiffened panels, midship section, web frame

Framing systems: Longitudinal framing, mixed framing, transverse framing

Breakdown of ship structures: Double bottom, side shell, deck, bulkheads, engine room structure, peak tanks

Module 2 – Loads on Ship Structure

Classification of loads acting on ship structure

Static and dynamic loads

Sea pressure

Internal loads

Net load on structure

Bending moment and shear force

Alternate loading condition

Module 3 – Strength of Ship Structure

Ship structural strength

Stress classification

Spreading of loads through the ships structure

Hull girder strength

Strength of primary structure

Finite element modelling analysis

Strength of plates and stiffeners: Stress check, section modulus, buckling strength

Fatigue strength

Corrosion of ship's structure, consequences of general corrosion

Net scantling approach

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Ship's Structure Fundamentals, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Ship's Structure Fundamentals is obtained after completing the course and passing the online test.

Presentation

This training course composed of 2 modules provides an overview of the requirements of the Ballast Water Management International Convention and the technical aspects related to the ballast water treatment equipment.

Objectives

On completion of the training, students will be able to:

Understand the background of the Ballast Water Management Convention, its structure and the most important regulations

Know the difference between the ballast water exchange and the performance standards

Understand the role of all stakeholders and actors

Be familiar with the approval, inspections, commissioning and tests of Ballast Water

Management systems

Understand the survey and certification requirements

Be familiar with the different technologies used and the installation requirements

Program

Module 1 – BWM Regulatory Aspects

Background

The Ballast Water Management Convention

Duties of the main stakeholders 

Ballast Water Management Standards

USCG Position 

Module 2 – BWM Technical Aspects

BWM Surveys

International Ballast Water Management Certificate

BWM System Approval

Sampling

Ballast water treatment systems technologies

Ballast water treatment systems installation

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Ballast Water Management, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Ballast Water Management is obtained after completion of the course and passing the online test. 

Presentation

This training course provides a general overview of the SOLAS requirements concerning radio communications and the Global Maritime Distress and Safety System (GMDSS).

Objectives

On completion of the training, students will be able to:

Know the requirements concerning radio communication equipment on board ships and offshore units.

Understand the GMDSS functional requirements.

Understand the means required for GMDSS tests and drills on board.

Know the requirements for EPIRB, radio lifesaving appliances and sources of energy for radio communication equipment.

Program

Safety radio surveys and certification

GMDSS functional requirements

o Land and satellite communications

o Inmarsat

o Functional requirements while at sea

o Distress urgency and safety radio communications

o Sea areas

o Maintenance of radio installation

o Maintenance of satellite EPIRB

o Maritime safety information

GMDSS equipment

o Equipment to be provided on board

o Core installation

o Inmarsat EGC

o NAVTEX

o Satellite EPIRB and VHF EPIRB

o Search and Rescue Transponder (SART)

o Digital Selective Calling (DSC)

o Two-way VHF radio-telephone

Main, emergency and reserve sources of power

Automatic battery chargers

Uninterrupted power supply (UPS)

Certificate

On completion of the training program, the student will be awarded:

A Certificate of SOLAS Safety Radio, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of SOLAS Safety Radio is obtained after completion of the course and passing the online test.

Presentation

This training course provides an overview of the IACS Recommendation 47 – Shipbuilding and Repair Quality Standards.

Objectives

On completion of the training, students will be able to:

Understand the applicability of IACS Recommendation No.47.

Get familiar with materials, welding and non-destructive testing. 

Understand the quality standards for steel ship construction and remedial standards for new buildings. 

Understand the quality standards for repair of ships in operation.

Program

General requirements for new constructions and repair of ships in operation

Qualification of welders, welding procedures and NDT operators

Materials

Equivalency of material grades

Surface conditions and acceptance criteria

Shipbuilding and remedial quality standards for new constructions

o Standard for flanged longitudinals and flanged brackets

o Standard for corrugated bulkheads

o Standard for pillars, brackets and stiffeners

o Standard for hull shape

o Standard for fairness of plating between frames

o Standard for alignment and remedial standard for misalignment

o Standard for butt weld plate edge preparation and remedial standard

o Standard for fillet weld plate edge preparation and remedial standard

o Standard for distance between welds

Repair quality standards for ships in operation

o Standard for welding, groove roughness

o Standard for renewal of plates

o Standard for doublers on plating

o Standard for renewal of internals/stiffeners

o Standard for welding of pitting corrosion

o Standard for welding repair of cracks

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Shipbuilding and Repair Quality Standards, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Shipbuilding and Repair Quality Standards is obtained after completion of the course and passing the online test.

Presentation 

This training course provides a general overview of the requirements of the AFS Convention and the anti-fouling systems used for new constructions and during ships operational life.

Objectives

On completion of the training, students will be able to: 

Understand the aim of the anti-fouling systems and their impact on the environment. 

Know the requirements of the AFS Convention. 

Be familiar with the applicable documentation and related certificates. 

Program 

What is fouling and how do anti-fouling systems work 

Influence on the environment 

Composition of anti-fouling systems 

The AFS Convention and regulations 

Applicability of AFS Convention for new and existing ships 

Regulation (EC) No. 782/2003 

Survey and certification 

o Types of surveys 

o Scope of Initial surveys for new and existing ships 

o Other surveys 

o Certificate issuance 

o The validity of the IAFS Certificate 

o Type approval certificates

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Anti-Fouling Systems awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Anti-Fouling Systems, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Presentation

This training course aims at providing an overview of the Port State Control background, organisation and procedures. It includes a description of the Port State Control inspection process, the criteria for selection of ships for inspection and the most common detainable deficiencies.

Objectives

On completion of the training, students will be able to:

Know the background and organisation of the various Port State Control regimes around the world

Understand the Port State Control procedures, the criteria for selection of ships for inspection and the inspection process

Know the various publications issued regularly by the different Port State Control regimes 

Get familiar with the most common deficiencies which may lead to ship’s detention

Program

PSC background and organisation

Purpose

Regulations

Regional Port State Control organisations

PSC procedures

Relevant instruments

Selection of ships for inspection

Inspection and selection scheme – Scope, priority and frequency of inspection

Paris MOU – New Inspection Regime (NIR) factors

PSC inspection process

Initial inspection

Clear grounds for more detailed inspection

More detailed inspection

Ship detention

Banning of ships

Publication of information

Detainable deficiencies

Examples of detainable deficiencies

Under SOLAS Convention

Under Load Lines Convention

Under MARPOL Convention

Under Chemical and Gas Codes

Under STCW Convention

Under ILO Conventions

Statistics from various PSCs

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Port State Control, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Port State Control is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general introduction to the most important maritime regulatory bodies: the International Maritime Organisation (IMO), the International Association of Classification Societies (IACS) and the European Maritime Safety Agency (EMSA).

Objectives

On completion of the training, students will be able to:

Understand the mission and structure of IMO, know the IMO requirements and the main International Conventions, and understand the process of acceptance, adoption and implementation of International Conventions.

Know the history of IACS and its mission, understand the IACS organization and the role of each entity, and know the main types of documents issued by IACS and how they are implemented.

Understand the European context, the role of the European Maritime Safety Agency (EMSA), and know the key points of the EU Regulation on common standards for ship inspection and survey organisations.

Program

Module 1 – IMO

IMO Mission

IMO History

IMO Organisation

IMO Regulations

Implementation of IMO Regulations

IMO Technical Assistance

Module 2 – IACS

IACS History

IACS membership evolution and current members

Membership criteria

The mission of Classification Societies and what Classification Societies do not do

IACS aims

IACS values – Leadership, technical knowledge, quality performance, transparency

IACS Organisation

Work programme and work process

IACS Panels

IACS main documents

Module 3 – EMSA

The European context

EMSA purpose and mission

EMSA structure

Regulation (EC) No 391/2009 

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Maritime Regulatory Bodies, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Maritime Regulatory Bodies is obtained after completing the course and passing the online test.

Presentation

This training course provides an overview of the general hazards existing on board ships, the appropriate protective equipment to be worn, the precautions to be taken before entering a confined space and other dangerous situations.

Objectives

On completion of the training, students will be able to:

Know the general principles and the hazards existing on board ships

Get familiar with the different personal protective equipment and their applications 

Understand the hazards related to confined space entries, and the precautions to be taken

Know the precautions to be taken about the various dangerous situations likely to be found on board ships.

Program

General principles

Risk control structure

Personal Protective Equipment (PPE)

o Protection of the head

o Protection of eyes and face

o Respiratory protection

o Protection of the feet

o Hearing protection

o Protection of the body

o Protection against fall from height

o Protection of the hands

o Other safety equipment

Safe boarding of ships and offshore units

General precautions while working on board

o Slips, trips and falls

o Internal inspections

o Engulfment

o Fire & explosion

o Hazardous materials

o Air quality & Oxygen rate

o Main points of attention

Confined spaces

o General precautions

o Entry permit

o Rescue attempts

o Particularly dangerous spaces

Other dangerous situations

o Use of rafts or boats for inspections

o Working at height

o Pressure tests

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Personal Safety on Board Ships, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Personal Safety on Board Ships is obtained after completion of the course and passing the online test.

Presentation

This training course describes the classification and statutory certification processes and provides an overview of the class and statutory surveys.

Objectives

On completion of the training, students will be able to:

Understand the classification process and get familiar with classification terms, definitions and rules.

Understand the process of Statutory Certification and get familiar with Statutory Certification terms.

Know the scope of Classification and Statutory Certification

Program

Module 1 – Classification

History of classification

History of Bureau Veritas

Classification Societies and IACS

Definitions

Scope of classification: Classification tasks, responsibilities of other parties, classification certificate, request for intervention, surveyor's intervention, operation and maintenance of ships, flag and port state control inspections 

Classification notations: Class symbols, construction marks, service notations, navigation and operating area notations, additional class notations

Classification process: Assignment of class for new buildings, classification after construction, class reassignment, maintenance of class

General principles of surveys: Survey procedure, definitions, survey preparation and conditions for surveys, terminology

Survey types: Class renewal surveys, other periodical surveys, occasional surveys

Suspension and withdrawal of class

Scope of surveys: Annual surveys, intermediate survey, class renewal survey, bottom survey, tailshaft survey, boiler survey

Module 2 – Statutory Certification

History of statutory conventions

Definitions

International conventions: SOLAS, COLREG, Load Lines, MARPOL, AFS, BWM 

Recognitions and authorisations

IMO RO Code

Statutory surveys

Periodicity of statutory surveys

Survey findings

Types of statutory certificates

Issuance of statutory certificates

Certificate

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Introduction to Class and Statutory Surveys awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to Class and Statutory Surveys, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Presentation

This training course provides a general overview of the MARPOL requirements concerning the protection against oil pollution from machinery spaces.

Objectives

On completion of the training, students will be able to:

Understand the means for control of discharge of oil residues and the requirements for oil filtering equipment and 15 ppm alarm.

Get familiar with the Oil Record Book, SOPEP booklet and the required drills.

Know the details of MARPOL surveys and the certificates to be issued.

Know the most common PSC deficiencies related to MARPOL Annex I.

Program

History of MARPOL Convention

Survey and certification

Sludge tanks

Oil fuel tank protection

Standard discharge connection

Oil filtering equipment: 

o Bilge water waste system

o Oily water separator

o Piping system

o Documentation

Control of discharge of oil

Oil record book

Shipboard oil pollution emergency plan

Scope of the different surveys required

PSC inspection and most common deficiencies

Certificate

On completion of the training program, the student will be awarded:

A Certificate of MARPOL Oil Pollution from Machinery Spaces, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Oil Pollution from Machinery Spaces is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general introduction to the Performance Standard for Protective Coatings (PSPC).

Objectives

On completion of the training, students will be able to:

Understand the main objectives of the IMO Performance Standard for Protective Coatings.

Know the Statutory and Classification requirements for new constructions.

Know the requirements for in-service maintenance, repair and re-coating.

Know the key Stakeholders and their roles.

Understand the contents of the Coating Technical File.

Program

Why was the performance standard needed?

Objectives of the PSPC

Key dates

Statutory and Class requirements

Primary surface preparation and shop priming

Steelwork and edge preparation

Surface preparation and shop primer removal

Coating

Erection

Key stakeholders

o Shipowners

o Shipbuilders

o Paint Manufacturers

o Classification Societies

Coating technical file

o Contents

o Review

o Maintenance and repair

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Introduction to PSPC, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to PSPC is obtained after completion of the course and passing the online test.