Course catalogue

Who is the course for?

All personnel, especially those who require an overview of produced water systems.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course is designed to provide you with a basic knowledge of how water is removed from oil and gas reservoirs and how it is treated prior to reuse or disposal.

How will the course benefit my company?

This course helps to ensure that all personnel apply a common approach to both company and industry best practice in relation to managing produced water.

What standards are referenced in the course?

• The Offshore Petroleum Activities (Oil Pollution Prevention and Control) Regulations 

• The Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation (REACH)

• OSPAR Harmonised Mandatory Control Scheme (OSPAR HMCS)

• US Environmental Protection Agency Federal Insecticide, Fungicide and Rodenticide Act (FIFRA)

• Methodology for the Sampling and Analysis of Produced Water

• Environmental Protection Agency's Method 1664

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel working in the Oil and Gas Industry

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an introduction to the Environmental Impact Assessment (EIA) process and explains the key stages in undertaking an EIA.

How will this course benefit my company?

By ensuring you are introduced to  the Environmental Impact Assessment (EIA) process and explains the key stages in undertaking an EIA.

What standards are referred to in this course?

Environmental Impact Assessment (EIA)

Environmental Statment (ES)

Assessment of the Effects of Certain Public and Private Activities on the Environment EU Directive (as amended by Directive 97/11/EC

Offshore Petroleum Production and Pipelines (Assessment of Environmental Effects) Regulations (EIA Regulations)

EU Directive 2003/35/EC

Offshore Petroleum Activities (Conservation of Habitats) Regulations

Merchant Shipping (Oil Pollution Preparedness, Response and Co-operation Convention) Regulations

Offshore Marine Conservation (Natural Habitats, & c.) Regulations

Marine and Coastal Access Act and Marine (Scotland) Act

Offshore Chemicals Regulations, and 

Offshore Combustion Installations (Prevention and Control of Pollution) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is this course for?

Personnel requiring awareness or understanding of blinding, venting and pressure relief methods and associated safety measures.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to blinding, venting and pressure relief in oil and gas operations

How will this course benefit my company?

By ensuring you are introduced to blinding, venting and pressure relief in oil and gas operations

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who work in the oil & gas industry and are involved with oil and gas extraction.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand oil and gas extraction.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of oil and gas extraction.

What standards are referred to in this course?

• The American Petroleum Institute (API)

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness and understanding of security within operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of personal security risks, information security risks and site security risks and their associated risk reduction methods

How will this course benefit my company?

By ensuring you have an overview of personal security risks, information security risks and site security risks and their associated risk reduction methods

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Maritime personnel who require an introduction to or awareness of maritime Protection and Indemnity insurance.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course aims to provide personnel with an awareness of the principles of maritime Protection and Indemnity Insurance.

How will this course benefit my company?

By ensuring you have an understanding of the maritime Protection and Indemnity Insurance. 

What standards are referred to in this course?

The Marine Insurance Act.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Personnel requiring awareness or understanding of glycol regeneration.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of the process of glycol regeneration

How will this course benefit my company?

By ensuring you have an overview of the process of glycol regeneration.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of asset stability.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with a basic understanding of the principles of asset stability.

This course consists of following sections:

Section One: ‘An Introduction to Asset Stability’

Section Two: ‘Understanding the Curve of Statical Stability (GZ Curve)’

Section Three: ‘Free Surface Effect’

Section Four: ‘Stability Criteria and Regulations’

Section Five: ‘Structural Strength’

How will this course benefit my company?

By ensuring you have a basic understanding of the principles of asset stability.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of the management of hydrocarbon releases.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of managing hydrocarbon releases

How will this course benefit my company?

By ensuring you have an overview of managing hydrocarbon releases

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awarneess or understanding of hydraulic systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to introduce learners to the different types of hydraulic systems.

How will this course benefit my company?

To ensure a minimum company understanding of different types of hydraulic systems found in the Oil and Gas Industry.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is this course for?
All well intervention personnel working with tools where explosives are an integrated part of the operation

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to give learners an introduction to explosives used in well intervention operations

How will this course benefit my company?
By ensuring you have an introduction to explosives used in well intervention operations

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable.

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.

Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy

Who is the course for?

Personnel who are required to work with Piping and Instrumentation Diagrams

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will enable you to describe the information provided in a P&ID and explain why this information is useful.

How will the course benefit my company?

Personnel who are able read and understand the information provided in P&IDs are better able to troubleshoot system problems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%.

Who is this course for?

Personnel requiring an awareness and understanding of the common ways rigging equipment is used.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to give an overview of the safe use of rigging equipment.

How will this course benefit my company?

By ensuring you have an overview of the safe use of rigging equipment.

What standards are referred to in this course?

The Lifting Operations and Lifting Equipment Regulations (LOLER) 1998

The Provision and Use of Work Equipment Regulations (PUWER) 1998

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness and understanding of Natural Gas & LNG and associated HSE considerations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to improve your knowledge of Natural Gas Liquid and LNG including transport and HSE considerations.

This course contains nine modules:

Module 1: An Overview of Gas Liquids

Module 2: Chemical and Physical Properties of Gas Liquids

Module 3: Liquefied Petroleum Gas

Module 4: Natural Gas Liquids (NGL) Recovery

Module 5: Removal of Natural Gas Impurities

Module 6: Liquefaction of Natural Gas

Module 7: Shore-Based Storage of Gas Liquids

Module 8: Transportation of Liquefied Natural Gas

Module 9: Health, Safety and Environmental (HSE) Issues of Gas Liquids

How will this course benefit my company?

To ensure you have an understanding of NLG, LNG, transportation and HSE considerations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice. 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of sealed sources of radiation in the US.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of sealed radiation sources.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US operations involving sealed radiation sources.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require a basic understanding of the operation of diesel engines and the importance of maintaining good lubrication for their safe operation.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an overview of how diesel engines operate, their components and their use within the industry. It will also outline the importance of maintaining good lubrication for their safe operation.

How will this course benefit my company?

This course will provide personnel with an overview of how diesel engines operate and the importance of maintaining good lubrication for their safe operation.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Presentation

This training course provides a general introduction to the corrosion process, the protective coating used to prevent corrosion, the coating process and coating inspection.

Objectives

On completion of the training, students will be able to:

Know the different types of corrosion and their causes.

Understand the corrosion phenomenon and the threat it represents to the structural integrity.

Know the protective coating systems used in shipbuilding.

Be familiar with the constituents, structure and curing prerequisites of the protective coating systems.

Understand the different phases of the coating process and the requirements for successful coating application.

Be familiar with coating inspection procedures and the requirements of the IMO PSPC.

Recognise the different forms of coating failure.

Program

Module 1 - Introduction to Corrosion and Protective Coatings

Corrosion definition

Causes of corrosion

Different forms of corrosion

Corrosion rate

Protective coating systems

Paint coating components

Types of coatings

Technical data sheets

Coating cure

Module 2 - Coating Process and Inspection

Coating process scheme

Surface preparation

Cleaning techniques

Surface preparation

Paint application

Coating durability requirements

Coating inspection

Coating system documentation

Coating inspector qualifications

Inspection procedures and plan

Coating defects

Certificate

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Corrosion and Coating awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Corrosion and Coating, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Presentation

This training course is about what an effective cyber security risk management should be. Its goal is not to address too many technical questions as the best technical expertise in the world won’t guarantee zero cyber risk. The course aims at providing your Company with a real battle plan: know the assets, know the enemies, organize accordingly and train the effectives. Although this will not be enough to avoid a cyber incident, the severity of the consequences of a cyber incident will depend on the company’s preparedness and ability to manage it.

Who the course is for?

The course ISM Code and Cyber Risk Management is aimed at anyone interested in understanding how an effective cyber security risk management should be. This may include Top Management of Shipping Companies, Ship Managers, Technical Superintendents, Ship Masters, Officers and Seafarers; Offshore Units Operators and Technical Staff, Shipyards Technical Staff; Surveyors; P&I and/or Insurance Inspectors; etc.

Objectives

On completion of the training, students will be able to:

Know what cyber security is, the main threats and their consequences.

Understand how to consider the cyber risks in the Safety Management System and how the ISM Code translated into cyber security.

Know the 12 cybersecurity commandments that will help implementing an efficient cyber risk management system.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

How will this course benefit my company?
By ensuring you have an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.