Course catalogue

Who is the course for?

All maritime professionals.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will the course benefit me?

By providing you with understanding of the regulations governing rigging and slinging, lifting maintenance and the inspection of lifting equipment.

 

How will the course benefit my company?

By ensuring personnel are aware of the regulations governing rigging and slinging, lifting maintenance and the inspection of lifting equipment.

 

What standards are referenced in the course?

• Lifting Operations and Lifting Equipment Regulations

• NORSOK Standards

• The International Guidelines for Offshore Marine Operations (GOMO)

• ILO (International Labour Organisation) 152

 

Is there an assessment?

Yes

The object of this course is to help participants maintain and develop their knowledge, skills and attitudes regarding their operational / emergency response function.

 

Course Content

Portions of this course will include group discussion and exchange of experiences, led by a helicopter pilot in active offshore service or with experience from offshore flying:

- Experiences from helideck service

- Improvement potential

 

Participants should also be able to: 

- Learn from the experience and incidents of other helideck personnel.

- Transfer their own experience as heliguards/HLO to other helideck crews.

 

This course is valid for 24 months.

Who is the course for?

All Maritime personnel who require knowledge of Legionella bacteria.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

To provide learners with knowledge of Legionella and the methods to reduce the risk of infection.

How will the course benefit my company?

To provide guidance on how to reduce legionella infections.

What standards are referenced in the course?

No standards of regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Anyone who professionally uses or handles products with a diisocyanate concentration of 0.1% or more. 

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will the course benefit me?

Learners will gain a comprehensive understanding of the health hazards associated with diisocyanates, enabling them to recognise risks and contribute to safer working practices. Learners will be equipped to respond effectively in the event of an accident or exposure to diisocyanates.

 

How will the course benefit my company?

From 24 August 2023, there are new EU requirements around diisocyanate handling and use. Training is mandatory for handling such chemicals/glue substances in workplaces. Individuals responsible for compliance will become well-versed in the legal regulations and requirements related to diisocyanate handling, helping organisations avoid

 

What standards are referenced in the course?

UK & EU Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) Regulations

 

Is there an assessment?

Yes

Course Description:- The Bridge Module 3 consists of five virtual tours; here, you will be guided on how to check various bridge equipment, test various alarms, and ensure you keep all the equipment correctly set for safe navigation. This module will also show you the most frequent checks and tests carried out by various inspectors and auditors, and you will be guided on how to go about an inspection and look for shortcomings like an inspector. Learning Objectives:- At the end of this module, the candidate will be able to: · Demonstrate the checking of the VDR and the associated HRU and also be aware of the requirement to save VDR data in case of an incident. · Demonstrate how to test the EPIRB and SART and will also be able to carry out checks associated with this equipment. · Carry out an inspection of the ancillary bridge equipment such as the rate of turn indicator, RPM indicator, rudder angle indicator, telegraph console, the navigational and Christmas tree light console etc. · Carry out an inspection of the battery room and monkey island and will be able to pick up findings similar to an inspector. · Correctly fill and complete the various log books such as Deck log book, compass error book, movement book etc. · Explain the general contents of the Masters standing orders.

Who is the course for?

Junior engineers, Junior Electrotechnical officers (ETO), Junior Deck Officers, Deck and Technical Ratings.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will the course benefit me?

This course will provide you with an introduction to how steering gear operates and the potential challenges with operation.

 

How will the course benefit my company?

This course will provide junior members of staff with an introduction on how steering gear operates.

 

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

 

Description of simulator exercise

Following the Introduction to Steering Gear e-learning, you will be requested to test, observe and operate the steering gear system, including the Steering Geer Control Panel Bridge prior to a vessel’s departure, utilizing the Engine room simulator from Kongsberg Digital.

Tianjin is a coastal city located in northeastern China known for its rich history, cultural heritage and scenic beauty. With so many things to see and do, it can be hard to know where to start with planning your trip to Tianjin. This course is a guide on how to spend a day in Tianjin to make the most of your time in this fascinating city.

 

The life of a seafarer is by no means easy. Seafarers spend months at a time away from their loved ones. Needless to say, once the ship docks in port, many seafarers will often attempt to take some shore leave for a limited number of hours to provide them with a short respite from work duties and a change in scenery. This is extremely important to ensure the mental health and wellbeing of the seafarers.

 

In this course, we will provide you with all the information you need to know to spend a day in Tianjin.

The course provides an awareness of rigging loft management to ensure that all lifting equipment is suitably stored and cared for to maintain its integrity and safety. The course is divided into Part 1 - Rigging loft Management and Part 2 - Lifting Equipment Examination.

Part 1 - Rigging loft Management

• Legal and Regulatory Requirements
• The Rigging Loft · Rigging Loft Registers
• Rigging Loft Controller
• Marking / Tracking lifting Equipment
• Colour Coding · Managing Lifting Equipment
• Control of Transit and Third-Party Equipment

Part 2 - Lifting Equipment Examination

• Periodic Examination
• Certification
• Pre-use Inspection, and…
• Common Fault

Who is the course for?

Operator personnel who are responsible for assessing and verifying the SIGTTO competency standards and Officers serving on LNG or LPG carriers who are being assessed.

 

Is previous experience required?

No previous experience is required to complete this course.  

 

How will the course benefit me?

This course will provide learners with an introduction to SIGTTO and an overview of the competency and experience matrices, as well as how to apply them.

 

How will the course benefit my company?

This course acts as an introduction to the assessment for operators that allows them to examine personnel compliance and will ensure that those employed by the operators have the relevant knowledge and experience to perform safely in their role.

 

What standards are referenced in the course?

The Society of International Gas Tanker and Terminal Operations (SIGTTO) 

International Association of Classification Societies (IASCS)

 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

COURSE DESCRIPTION

In a risk assessment,  potential events and consequences are considered. In this course, we focus on unwanted events such as failures and accidents. This could be, for example, a gas leak or afire at an oil platform, that equipment stops working during an operation in a hospital, or that an accident occurs during the execution of a work task. The risk analysis process consists of three phases:

1) Planning

2) Risk assessment

3) Risk management

This course shows how these phases can be planned and implemented in practice. There are many guidelines and standards on how a risk assessmentcan be carried out, and many are adapted to particular industries and professional areas. This course presents a general approach that can be used in most industries.

 

 

COURSE CONTENT

•Introduction:What is risk? What is the purpose of a risk assessments?

•Risk assessment and risk management:Description of the steps in a risk assessment, what is important to look out for in the various steps, and how the risk assessment can be applied in risk management.

•Risk analysis methods:There are numerous risk assessment methods that are suitable for looking at different issues. An introduction is given to some of these; Hazid/ course risk analysis, SJA, HAZOP, FMEA and QRA. It’s crucial to choose a method that is well adapted to the problem you are looking at.

 

 

STANDARDS REFERRED TO IN THIS COURSE

- ISO 31000:2018 Risk Management

 

 

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY?

After completing the course, participants should be able to understand what a risk assessment is and have knowledge of the relevant steps. Participants will also have basic knowledge of:

•Different risk analysis methods.

•Choice of risk analysis methods within the three main categories; simplified risk assessment, standard risk assessment and model-based risk assessment.

•Typical pitfalls for planning and carrying out risk assessments.

•Understanding how risk assessments can contribute to decision support.

 

 

For more information and prices:

http://www.hseacademy.com

learning@proactima.com

Phone: + 47 4000 1933

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

How will this course benefit my company?
By ensuring you have an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Norwegian authorities demand that everyone using personnel lifts must have documented training in the use of lifts. It is the employers’ responsibility to provide such training for their employees. (See “Regulations concerning the performance of work” nr. 1357, § 10-2)

Objective:
The course provides theoretical knowledge in the use of personnel lifts and raises the awareness of risks and ways to mitigate these.

Themes discussed:
- Law and regulation
- Operation
- Types of lifts and their usage
- Maintenance and control
- Classification
- Unwanted incidents and risks 

Every lesson contains a video presentation.

Who is the course for?

Any personnel with a desire to improve their ability to establish and maintain high performance standards onboard.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

Memorization is the ability to encode, store and effectively retrieve previously obtained information or past experiences. It involves the capacity to store information such as words, numbers, rules, and procedures, and retrieve them to take action, such as complete tasks or solve problems. This course allows you to showcase to your employers that you are being proactive and in line with the maritime industry's modern-day demands.

How will the course benefit my company?

Employers are now incorporating seafarer’s soft skills into their crewing decisions. The soft, ‘non-technical skills’ are increasingly important on board due to the rapidly changing workforce and automation of technical tasks. Additionally, maritime accident investigations indicate that a lack of soft skills and human error is the most common reason behind accidents at sea.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course replaces the previous PRO-015 Basic HSE-Management course.

This course is designed to improve the participants' ability to handle HSE challenges in their daily work, and provides reasons for why this work is both useful and profitable. The participants are introduced to the most important principles and methods within HSE work. The course provides a theoretical foundation in HSE, all the time with a clear view of how the work with safety, health and environment is planned and carried out in practice.

The course can be combined with a 1-day classroom session to comply with the Working Environment Act Sections 6-5 and 7-4 on training for Safety Delegates and WEC representatives. Please contact us on post@proactima.com for more information.

COURSE CONTENTS

• HSE Legislation

• Management Systems and HSE

• Risk Management

• Goal based Management

• HSE Roles and Co-operation

• HSE Culture and Organisational Culture

• Follow-up and Reviews

• Emergency Preparedness and Crisis Management

• Investigation and Learning

• Continuous Improvement

 

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY?

• Knowledge of the most important management elements in HSE work

• Knowledge of principles for a good HSE culture

• Introduction to common methods for risk management, audits and improvement

• Motivation to work with HSE in own workplace

Upon completing this course, you will be able to describe the salient points of Rule 5 and to whom the rule applies. You will also be able to apply the rule for Officer of the Watch level orals questions.

In this course we explain why gases are divided into classes, areas into zones and show you how equipment is designed and marked for use in specific conditions. All to ensure safety and reduce the potential for explosions in gaseous atmospheres.

Several international and national organizations have made standards which use the class and zone system to provide guidance to safe protection systems for various conditions.

Upon successful completion of the course, candidates will have acquired a general understanding of fire and explosion theory and the principles of protection concepts.

Content:

•Fire and explosion theory

•Main organizations and regulations for Ex

•Area classification and Ex zoning

•General principles for type of protection and marking

•Applicable standards for Ex

•Proper design and positioning of Ex equipment

•Exd protection

•Exe protection

•Exp protection

•Exo, Exq and Exm protection

•Exn and Exs protection

•Exi protection

•Ex protection in real-life situations

The candidate shall upon completing this module demonstrate sufficient knowledge of Ex Basics by taking an assessment.

Legislation & references

IEC 60079-10-1, IEC 60079-14

Fusex 2014/34/EU(design), Fhosex 99/92/EC(HSE)

2014/34/EU and 2014/34/EU (ATEX)

NEK 420

Hensikten med kurset er å gi blivende kranførere god teoretisk og praktisk grunnopplæring på fastmonterte hydrauliske kraner. Kurset gir elevene god innsikt i prinsippene for kranens konstruksjon og virkemåte. Etter endt kurs med bestått teoretisk prøve vil denne sammen med bestått praktisk kjøreprøve være grunnlaget for utstedelse av kranførerbevis G20 Fastmontert hydrauliske kraner.

Opplæringen dekker kompetansekrav i NORSOK standard R003N for Kranfører G20. 

Kursinnhold
- Innledning
- Konstruksjon
- Hydraulikk
- Mekanikk
- Lover / forskrifter / standarder
- Ståltau / vinsj / blokker
- Dokumentasjon
- Sikkerhetsbestemmelser
- Løfteredskap
- Øvingsoppgaver
- Eksamen

This course is only available in Norwegian.

Who is this course for?
All well intervention personnel working with tools where explosives are an integrated part of the operation

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to give learners an introduction to explosives used in well intervention operations

How will this course benefit my company?
By ensuring you have an introduction to explosives used in well intervention operations

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of asset stability.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with a basic understanding of the principles of asset stability.

 

This course consists of following sections:

Section One: ‘An Introduction to Asset Stability’

Section Two: ‘Understanding the Curve of Statical Stability (GZ Curve)’

Section Three: ‘Free Surface Effect’

Section Four: ‘Stability Criteria and Regulations’

Section Five: ‘Structural Strength’

 

How will this course benefit my company?

By ensuring you have a basic understanding of the principles of asset stability.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

Course Goal:

This course aims to provide learners with an awareness of nitrogen and provide best practice for work involving nitrogen in oil and gas producing facilities

This course covers the following learning objectives: 

LO1 Define nitrogen

LO2 Describe the properties of nitrogen

LO3 Explain why nitrogen is used in the workplace

LO4 Describe the hazards associated with nitrogen

LO5 Explain the importance of carrying out a risk assessment

LO6 Give examples of control measures that can be used to limit exposure to nitrogen

LO7 Describe how to use breathing apparatus

LO8 Explain how nitrogen affects the human body

LO9 Identify correct emergency response actions