Course catalogue

The objective of the training is to provide training to acquire adequate knowledge of packing, securing and transporting loads as well as user control of load carriersThis covers the entire logistics chain from supplier to customer and vice versa to ensure that incidents do not happen.

 

Introduction

Causes of near misses, deviation reports

Risk assessment

Regulations, standards and ON guidance

Documentation

Personal protective equipment

Different load carriers, planning, user control, packing

Use, control of load securing equipment,

 

Practical training:

- Use of personal protective equipment

- Implementation of user control

- Plan and implement loading and securing loads

- Proper use of utilities

- Checklists

- Safety during operation

- The use of barriers

- Theoretical and practical exam

Innhold:

STCW A-VI/2-1 Redningsfarkost

STCW A-VI/3    Ledelse av brannslokking

STCW A-VI/4-1 Medisinsk førstehjelp

Varighet:

Kurset gjennomføres på minimum 24 timer fordelt på 3 dager.

Repetisjonsfrekvens:

All sikkerhetsopplæring skal oppdateres hvert 5.år.

Annet:

For kursdeltagere som innehar rollen som dekksoffiserer, kreves det i tillegg Medisinsk Behandling STCW regel VI/4, avsnitt A-VI/4 og tabell A-VI/4- 2.

De aktuelle deltagerne må gjennomføre et oppdateringskurs for medisinsk behandling i henhold til emneplanene fastsatt av Sjøfartsdirektoratet

(kurs 217 medisinsk behandling oppdatering)

Course Description:-

This course consists of 2 modules. It gives an insight of the conduct of the Bridge team in Pilotage waters; this must be viewed in conjunction with your SMS, your company-navigational procedures and checklists. 

Created from real-life dialogues between the bridge team and the pilot, you will get an insight into the preparation, both arrival port and departure port, with the pilot on board.

The module explains the preparation prior to pilot boarding and the Master pilot exchange procedures. Also, in case the pilot decides to amend the route after getting updates from the VTS, the ship’s passage plan must be amended and recorded accordingly. 

This also serves as a reminder to ensure the various checklists, the log book and the movement book are correctly filled, as these will most likely be checked by various inspectors and auditors. 

 

Learning Objectives:-

At the end of this module, the candidate will be able to, 

1) Explain the bridge arrival checklist/ bridge departure checklist prior to Pilot boarding 

2) Explain the various information required to give port control prior to the pilot boarding

3) Explain the information exchanged between the Master and pilot, including the passage plan, intended track, the number of tugs, the berth and the final mooring arrangements  

4) Explain all the tests to be carried out prior to arrival/departure and ensure the bridge manning level is as per the SMS. 

5) Confirm that the pilot only advises, but the Master has an overriding authority and is in command.  

6) Confidently seek clarification or politely challenge the pilot 

7) Have self-confidence and self-assurance while dealing with third-party inspectors and answering questions related to the pilot and the bridge team

Course Description:-

This bundle consists of 8 modules, which include various aspects of engine room watchkeeping, including the engine control room.

This bundle focuses on the engine room.

1) You will be various aspects of engine room watchkeeping, including the engine control room and the testing and inspections of various machinery, UMS procedures, and various documentation, including the engine log book This module will also show you the most frequent checks and tests carried out by various inspectors and auditors.

2) It will help combine your knowledge, core competency, your soft skills, your situational awareness and your attitude and empower you to be an efficient member of the vessel’s team.

3) It will assure the candidate on how to deal with third-party Inspectors professionally and how to handle the situation maturely. It also serves as a refresher training before any inspection and, in turn, will boost the candidate's confidence.

 

Learning Objectives:-

At the end of this module, the candidate will be able to

 

1) Carry out systematic checks and tests whilst inspecting the engine room and the associated machinery; this will ensure that these spaces are compliant and ready for inspection.

2) Plan, manage and work more efficiently, which in turn will build confidence and improve efficiency

3) understand the responsibility and importance of having the right attitude when dealing with third-party inspectors, 

4) understand the importance of good housekeeping, accurate record keeping and complying with the Company SMS, International statutory and Flag state requirements

There is a high risk of fires if employees don't know what to do or are not properly trained and instructed. Risks due to fires is more likely if they don't practice fire drills regularly. You will learn the three aspects of fire safety training: identifying fire, steps to mitigate fire, and how to prevent fire.

In this course, you will:

• Identify fire hazards at workplace

• Understand the steps to take in the event of fire

• Learn how to prevent fire at the workplace

This course is taken externally on the Astutis platform, the delegate will receive a separate email from the provider with access details once this is processed by Astutis.

The enrolment will then be marked complete in Trainingportal once the course is passed.

 

The IOSH Managing Safely® Refresher course re-introduces and cements the important concepts and philosophies initiated from the IOSH Managing Safely course.

Objective:

By studying the IOSH Managing Safely Refresher you will cement further your understanding on the requirements of how to effectively and safely lead and manage businesses.

Learning Objectives:

It builds knowledge to help you and your workforce to: 1. Control Workplace Hazards  2. Reduce Risk   3. Improve Productivity

Final Assessment:

A short multiple choice test, taken at the end of the course.  You will have 30 minutes to answer 21 questions in a variety of formats, including multiple choice, true/false and open questions with short answer.

In this course, we will cover: - Heart Attack, - Poisoning, and - Stroke.

The aim of this course is to introduce you to the world of water management and the controls required. (Folder image, credits: Pixabay.com & unsplash.com)

In this course, we will cover: - Diabetes, - Asthma, and - Anaphylaxis.

In this course, we shall be focusing on the third focus of the WHO 2008 guidelines. We will be reviewing, (in addition to some environmental microorganisms) some of the most important organisms reported in Western countries as potentially transmissible pathogens in water. Attention will be focused on their morphological, biochemical and functional characteristics, the symptomatology of diseases associated with them and the response to environmental factors and water treatment.

This course focuses on the final checks on arrival for the bridge, deck, CCR accommodation, forecastle, and pumproom to ensure the vessel is compliant in all respects and ready for any inspection. At the end of this module, the candidate will be able to: · Demonstrate the various general checks and tests that are carried out in the Accommodation, CCR and aft deck on arrival and will be able to ensure that the Accommodation, CCR, and aft decks are compliant in all respects and ready for inspection. · Demonstrate the various general checks and tests that are carried out on the bridge on arrival and will be able to ensure that the bridge is compliant in all respects and ready for inspection. · Demonstrate the various general checks and tests that are carried out on the main deck and forecastle area on arrival and will be able to ensure that the main deck and forecastle are compliant in all respects and ready for inspection. · Demonstrate the various general checks and tests that are carried out in the pump room on arrival and will be able to ensure that the pump room is compliant in all respects and ready for inspection.

This course offers the foundation in theoretical and practical surgical skills and techniques for wound care and cuts that are relevant to the work place. The focus is orientation to the different types of suture materials, suture techniques, proper preparation, examination, evaluation and treatment of different types of wounds / cuts to be able to give the optimal patient care as well as the basis of skin anatomy, physiology and pathology.

 

Objective:

After completing the course, participants will be able to assess wound infection, treating cuts with various suturing techniques and the use of surgical instruments and equipment, and placing local anesthesia. 

 

Content :

Anatomy, wound healing and infections
Examination and assessment of wounds and cuts
Assessment of tendon function after cuts
Choice of treatment of wounds and cuts
- Basic principles of wound care
- Local anesthesia
- Surgical knots
- Various suturing techniques
Surgical instruments used in suturing
Assessment of wounds and cut which can be treated onboard and who to sent to land
Removing sutures
Complications of suturing
Practical tips and advice

 

Instructor: Dr.: Mark Lewis Belandres Barbero M.D

Interested in this course please contact Total Safety AS as it's still avilable course by request.

This course provides basic training on relevant first aid topics, with emphasis on practical skills training. After completing the course, participants should be able to provide lifesaving first aid and be able to assist the nurse in the examination and treatment of patients.

 

Course Content

The course provides thorough basic instructions in relevant first aid topics emphasising training in practical skills. 

- Emergency measures/organisation

- General first aid

- Examination of the patient

- Unconsciousness

- Bleeding and traumatic amputation

- Abdominal injuries

- Loss of circulation

- Head injuries

- Back and neck injuries

- Fire and caustic burns incl. electricity and radiation

- Fractures

- Measuring blood pressure

- Chest pains (heart disease)

- Breathing problems and cramps

- Lifelessness – Cardiopulmonary Resuscitation

- Assisting the nurse in administering an infusion

- Hypothermia

- Mental reactions and dealing with stress (as a result of

accidents or disasters)

- Accident site with several injured – Triage on scene.

- Chest injuries

 

The course is valid for 24 months.

Innhold

Passasjer- og Krisehåndtering holdes i henhold til STCW-konvensjonens regel V, avsnitt A-V/2 og tabell A-V/2 og inneholder teoretisk og praktisk undervisning innen emnene.

Passasjerhåndtering

Sikkerhetstrening for mannskap i passasjerområder

Krisehåndtering og menneskelig adferd

Passasjersikkerhet, sikring av last og skipsåpninger

Varighet

Kursets varighet er 2 dager, tilsammen 18 skoletimer. Den første kursdagen gjennomføres som e-læring på egenhånd, før du møter til den praktiske dagen på kurssenteret.

 

E-læringen utgjør undervisning tilsvarende 8 skoletimer.

Kursdagen på kurssenteret er 10 skoletimer

1 skoletime er 45 minutt

 

Innlevering

E-læringen tar ca 4 klokketimer å gjennomføre, og denne må være 100% gjennomført før du møter på kurssenteret.

Participants will learn practical strategies and techniques to help them manage their time more effectively, prioritise tasks, and overcome procrastination. The course will also explore the importance of goal setting and provide strategies for staying motivated and measuring progress. We will cover methods for improving focus and concentration, such as mindfulness practices and techniques for minimising distractions. Finally, participants will learn effective stress management techniques to help them maintain mental clarity and productivity. This course is for beginners in productivity delivered by the award winning instructor Richard Andersone BCA with recognition at the house of Lords, BBC and a board member of a government committee.

In this course, we will cover: - Causes of Fire - Understanding Fire - The Fire Triangle - Fire Hazards and How to Control Them - Means of Escape - Detecting Fire and Raising the Alarm - Fire Signage - Fire Extinguishing Equipment - Relevant Legislation - Fire Risk Assessment - Fire Safety Training - Role of a Fire Warden

Presentation

This training course composed of 2 modules provides an overview of the requirements of the Ballast Water Management International Convention and the technical aspects related to the ballast water treatment equipment.

Objectives

On completion of the training, students will be able to:

Understand the background of the Ballast Water Management Convention, its structure and the most important regulations

Know the difference between the ballast water exchange and the performance standards

Understand the role of all stakeholders and actors

Be familiar with the approval, inspections, commissioning and tests of Ballast Water

Management systems

Understand the survey and certification requirements

Be familiar with the different technologies used and the installation requirements

Program

Module 1 – BWM Regulatory Aspects

Background

The Ballast Water Management Convention

Duties of the main stakeholders 

Ballast Water Management Standards

USCG Position 

Module 2 – BWM Technical Aspects

BWM Surveys

International Ballast Water Management Certificate

BWM System Approval

Sampling

Ballast water treatment systems technologies

Ballast water treatment systems installation

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Ballast Water Management, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Ballast Water Management is obtained after completion of the course and passing the online test. 

Who is the course for?

This course is for those who work in an industry that has a direct impact on climate change. 

 

Is previous experience required?

No previous experience is required to complete this course. 

 

How will the course benefit me?

This course will provide you with an insight into how global warming is affecting Earth and what can be done by the nations, governments and associated industries to help achieve the goal of net zero before 2050. 

 

How will the course benefit my company?

This course will benefit any company that has a direct impact on global warming and will provide an overview of renewable energy solutions that can be used to help tackle the issues associated with global warming. 

 

What standards are referenced in the course?

The Paris Agreement

Intergovernmental Panel on Climate Change (IPCC)

The UN Food and Agriculture Organisation