Course catalogue

LEARNING OBJECTIVES

This course is specifically designed for training future DPO’s on board a large number of offshore vessels.

The course aim to provide the candidates with knowledge and skills as preparation for DNV DPO Advanced Operations exams and certification.

By the end of course the students shall have:

• Acquired a thorough knowledge of the various types of DP operations such as ROV operations, cable laying pipe laying, trenching, dredging and rock-dumping
• The capability to operate the DP in the various modes associated with such operations, i.e. joystick,  auto pos mode, autotrack mode and follow target mode
• Recognize when environmental conditions or system failure  requires DPO to take action to avoid hazardous situations
• The  ability to carry out such operations according to existing operational guidelines and checklists
• The ability  to demonstrate good personal attitudes towards safety in operating DP vessels according to best practice in the industry

CONTENT

Planning,  briefing and de-briefing of various field exercises according to the existing guidelines, regulations, and industry standards. Repetition of necessary DP theory to close any knowledge gap the students may have in these subjects.

LEARNING PROCESS

All DP  exercises will be carried out on a full scale DNV GL Approved DP Class A simulator, using vessels that are equipped according to DP class 2 and 3. The participants will perform both surface and subsea  operations, utilizing the following DP modes: Joystick, Autoposition, Autotrack and Follow target functionalities.

SPECIAL INFORMATION

• DNV GL, Standard for Certification no. 0023
• DNV GL, Standard for Certification no. 0008
• DNV GL, RP-0007
• NMA 201209765-4/813.4.
• GOMO, Guidelines for offshore marine operations, Supply and Rig Move Operations and other relevant guidelines such as IMCA M-117 and other IMCA guidelines

A level test will be conducted before commencing the course.

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

Når kurset er fullført, skal deltakerene være i stand til å klargjøre livbåten, organisere ombordstigning, låre og frigjøre båten, manøvrere og lede operasjonen av livbåten på vannet. 

Regelverk / ansvarsforhold 

Utsetning- systemer for skip og rigg 

Nødkommunikasjon og aktuelt utstyr 

Utstyr i båt og flåte 

Livreddende førstehjelp 

Prosedyrer / alarminstruks 

Kommandoforhold / samarbeid 

Personlig vern og utstyr 

Praktisk øvelse under aktuelle båttype 

Opphold i båt 

Berge opp folk fra sjøen 

Snu en kantret redningsflåte iført redningsvest

Førstehjelp

With COVID-19 meaning that home working is no longer an option but a necessity for many, what are the potential side effects on our health and work performance. Employers may need to provide additional training to ensure appropriate supervision and work behaviours. These include remote technology, communication skills development, time management and ergonomics.

Effective remote working requires greater self-control and discipline to avoid the boundaries between work and personal life becoming blurred. Research has shown that, in general, homeworkers tend to work longer than office workers and this increases with the use of technology. Homeworkers do benefit from greater working time autonomy, but how effectively this is applied depends on the discipline of the individual.

The ‘Effective Remote Working’ bundle includes 3 months access to 10 online courses and over 7 hours of eLearning.  

• Management of Change

• Lone Working (Employees)

• Smart Workplaces: Responsible Social Media for Team members

• Business Writing: E-Mail Techniques

• AEC Success: Effective Decision Making

• Webinars – Conducting a Web-based Presentation

• ABCs of Managing Time & Effort: The 80/20 Way

• Smart Time Management: 7 Steps to Regaining Control of Your Day

• 3-way Communication

• Smart Customer Service 3: Effective Verbal and Nonverbal Communication

Norske myndigheter stiller krav til at arbeidstakere som skal jobbe i mast kan dokumentere praktisk og teoretisk opplæring. Kurset gir en grunnleggende teoretisk og praktisk innføring i hvordan man kan jobbe på en sikker måte i mast. Arbeidsgiver er ansvarlig for at arbeidstakerne har den nødvendige opplæring. («Forskrift om utførelse av arbeid»).

Hensikt:

Kurset skal gi deltakerne en grunnleggende teoretisk og praktisk innføring i hvordan man kan jobbe på en sikker måte i mast.

Innhold:

– Lover og forskrifter

– Kontroll, daglig og periodisk

– Oppbevaring og vedlikehold

– Evakuering med smartline

– Kameratredning med smartline

– Risikovurdering

This course is only available in Norwegian.

Norske myndigheter krever at alle bygg skal være forsvarlig brannsikret i henhold til byggeforskriftene. Kurset gjør deltakerne kjent med de aktuelle forskriftene som gjelder og hvordan og hvorfor man utfører branntetting. Innføring i brannceller, brannseksjoner, bygningstekniske forhold og grunnleggende kunnskap som er nødvendig for å gjennomføre branntetting på en sikker og forskriftsmessig måte. 

Hensikt:

Gi deltakerne økt kunnskap om brannceller, brannseksjoner, bygningstekniske forhold og grunnleggende kunnskap som er nødvendig for å gjennomføre branntetting på en sikker og forskriftsmessig måte.

Innhold:

– Lover og forskrifter

– Hvorfor branntetting

– Brannceller og brannseksjoner 

– Brannsikring av gjennomføringer i brannskillende konstruksjoner

– Løsninger for branntetting og brannfuging

– Dokumentasjon

The purpose of the course is to provide future crane operators with good theoretical and practical basic training on permanently mounted cranes. The course gives students a good insight into the principles of the crane's construction and operation. After completing the course with a passed theoretical test, this, together with a passed practical driving test, will be the basis for issuing a crane driver's license G20 Fixed crane.

The training covers competence requirements in NORSOK standard R003N for Crane Operator G20.

Course content

- Construction of different types of hydraulic cranes

- Review of current laws and regulations

- Mechanics - forces acting on different structures

- Hydraulic systems, pumps, valves - modes of operation

- Expert inspection and the crane's documents

- Capacities - table use

- Crane operator instructions

- Steel rope for cranes and winches

- Drums - wire rope sheaves

- Safe use of lifting equipment

Learning Objectives:

Course for operators of fixed cranes

Basic documented safety training for winch and personal winch operators – Module P-3.3. The objective of the training is that the person receiving the training acquires sufficient knowledge about the safe use of winches and personnel winches with associated equipment so that accidents during use are avoided.

A successful course qualifies for a certificate of competence on Winch Module P-3.3, approved offshore.

Objective:

The theoretical part of the training is fundamental to the practical part so that the participant gets a good understanding of the safe use of winches and personal winches with associated equipment.

The training is carried out with realistic exercises and safety aspects are emphasized. The participants carry out the exercises in groups in our training rig with the guidance of an instructor. Training ends with a theoretical and practical exam.

Passed course qualifies for a certificate of competence on winches approved offshore.

Content:

Laws and regulations

Build-up

Safety provisions

Certification

Overload protection and use of operating switches and emergency stop

Risk assessment

Correct and incorrect use of winches, as well as restrictions on use

Driving speed

Driving using signals

Driving loads

Coiling of wire rope

Personnel winching

Marking

Daily control and maintenance

Inspection and disposal rules for winch and associated equipment

Final exam

Classes:

Scheduled upon request. Please contact Gantic on booking@gantic.no.

The course is aimed at those who are going to become expert inspectors on overhead cranes. The course is also aimed at people who carry out repairs and maintenance of overhead cranes or who want to expand their professional competence. It is recommended to have a G4 bridge and traverse crane course in advance. The course is in accordance with regulation on administrative arrangements best. 706.

Objective:

The course runs over four days with combined classroom teaching and practice. The participant must have passed a theoretical and practical test to be approved for the course. In addition, the participant must be able to document 48 months of relevant practice before an inspector's certificate can be issued. 

Course participants must be employed in a specialist business to be able to work as an inspector after completing the course.

Content:

Regulations

Requirements for expert activity and expert control

The controller's task and area of responsibility

Construction, marking, control, lifetime assessment

Certification of equipment

Procedures

Final theoretical and practical test

Classes:

Scheduled upon request. Please contact Gantic on booking@gantic.no.